News

Cellulose ether is often an indispensable component in dry-mixed mortars. Because it is an important water retention agent with excellent water retention properties. This water retention property can prevent the water in the wet mortar from evaporating prematurely or being absorbed by the substrate, prolong the operable time of the wet mortar, ensure the cement […]

HPMC mainly plays the role of water retention and thickening in cement mortar and gypsum-based slurry, which can effectively improve the cohesion and sag resistance of the slurry. Factors such as air temperature, temperature and wind pressure will affect the evaporation rate of water in cement mortar and gypsum-based products. Therefore, in different seasons, adding […]

External Insulation Finishing Systems (EIFS) is made of polymer mortar, glass fiber mesh, flame-retardant molded polystyrene foam board (EPS) or extruded plastic board (XPS) and other materials, and is bonded on site. Cementitious thin layer adhesives are used to adhere tiles for installation of External Insulation Finishing Systems (EIFS/ETICS). They offer simple and lightweight workability, […]

Wall putty is a material for filling the imperfections and smoothing the surface of walls. It is a cement-based fine powder that is indispensable before painting. Its excellent adhesion and tensile strength can extend the life of the wall paint. It can be used on both dry and wet walls, and also be applied on […]

What are the functions of redispersible latex powder? As an indispensable functional additive for mixed mortar, redispersed polymer powder can improve mortar, mortar performance, strength, bonding strength with various substrates, mortar properties, compressive strength, flexibility and deformability, bending strength, wear resistance, toughness, adhesiveness and water holding capacity, and machinability. In addition, polymer powder with hydrophobicity […]

The redispersible powder is a special water-based emulsion made by spray drying and a polymer binder prepared mainly based on the vinyl acetate-ethylene copolymer. After partial evaporation of water, polymer particles form a layer of polymer film by agglomeration and play the role of adhesive. When redispersible polymer powder is used together with inorganic cementitious […]

Improved Workability RDP improves the workability of construction materials, making them easier to mix, apply, and work with. This can reduce labour costs and improve productivity on construction sites. RDP enhances the flowability, slump, and spreadability of materials. The final result is a more uniform final product. Also, it could prevent segregation and bleeding of […]

HPMC for wall putty reduces water loss when pouring out cement and lowers the density. Wall putty is also known as a skim coat. It’s a water-resistant white cementation powder and other additives. It’s ideal for concrete and mortar to use on interior & exterior walls and ceilings. HPMC provide thickening, water-retention, and lubrication results […]

Gypsum has long been used in the construction industry due to its versatility and broad applicability. It is non-toxic, fire resistant, non-combustible, and very workable and user friendly, allowing its users to create aesthetically pleasing finishes. Gypsum also has very good thermal and acoustic properties. The most common uses of Gypsum products in the construction […]