Additive Amount of Hydroxypropyl Methyl Cellulose

Additive Amount of Hydroxypropyl Methyl Cellulose

Wall putty is generally used 150,000 viscosity can be, a ton of added amount of about four kilograms (200,000 viscosity is larger, the construction will be less, the greater the viscosity, you can choose 200,000, 100,000 good construction, but the viscosity is relatively small, water retention is less, you can buy according to your own needs)

The amount of mortar added to a ton of about 3 kilograms, mortar industry, 150,000 viscosity and 200,000 viscosity customers are useful, according to the level of their own product requirements, choose one of them.

Gypsum needs to use 200,000 viscosities, and the addition amount of one ton is about 2.5 kilograms

It is necessary to use 200,000 viscosity, the viscosity of the adhesive is large, the amount of one ton is 5-6 kg, and the effect is remarkable with the redispersible latex powder

It is necessary to use 200,000 viscosity, a ton of adding amount of about 6 kilograms of a package of cement about 300g, and then combined with calcium chloride curing, viscosity curing effect is significant.

It is necessary to use cold water to instantly dissolve 200,000 viscosity, and the addition amount is about five-thousandths to ten thousandths, which is adjusted according to the thin consistency required by oneself.

Various exterior wall putty in the inner wall

1. Improve the water retention of putty, lubrication, thickness and adhesion strength
2. Easy to batch scraping, do not take off powder, better control the infiltration of the air, eliminate the gap, form a bright and delicate coating surface
3. Avoid cracks and dehydration caused by excessive water loss. At the same time, the adhesion of putty is strengthened, reducing the flow phenomenon during construction, and making the construction smoother.

Brush gypsum

In the gypsum series products, the cellulose ether is mainly to protect the water, and there are lubrication and other operations.

At the same time, it has a certain slowing effect, which solves the problem of cracking drums during the construction process. The initial intensity cannot be achieved, which can extend the working time.

Building mortar Purenal mortar masonry mortar

Water retaining can fully hydrate the cement, and significantly improves the adhesive strength

At the same time, it can improve the tensile stretch and shear strength, greatly improve the construction effect, and improve work efficiency

At the same time, it also improves adhesion performance, has anti -hanging capacity, and improves anti -contraction and cracking resistance.

Exterior wall insulation mortar

Cellulose ether focuses on bonding in this material, enhances the intensity effect, makes the mortar easier to coat, improves work efficiency, and at the same time has anti -vertical flow effect

Strong water retention performance can extend the working time of the mortar, improve anti -contraction and crack resistance, improve surface quality, and improve adhesion strength

Used for tile adhesive (pneumatic) marble and plastic decorative adhesive

Strong water retention does not have to be soaked or wet tiles and bases in advance, significantly improved its adhesive strength

The slurry can be constructed long, delicate, uniform, convenient for construction, and at the same time with good anti -moisturizing movement.

It can extend the drying time, improve the efficiency of tiles, and have strong adhesion. At the same time, it can reduce the amount of cement and reduce costs.

Used for tile adhesive (pneumatic) marble and plastic decorative adhesive

Strong water retention does not have to be soaked or wet tiles and bases in advance, significantly improved its adhesive strength

The slurry can be constructed long, delicate, uniform, convenient for construction, and at the same time with good anti -moisturizing movement.

It can extend the drying time, improve the efficiency of tiles, and have strong adhesion. At the same time, it can reduce the amount of cement and reduce costs.

Honeycomb ceramic

Give lubrication in the new honeycomb ceramic, water retention, and increase intensity.

Latex paint coating

In the coating industry, cellulose ether can be used as a membrane, thickening agent, emulsifier and stabilizer, so that it has good wear resistance, compassion, and adhesion.

Improve the pH stability of the surface tension, and the mixing effect with organic solvents is also better, and the water retention performance makes it have good painting and flowing.