News

HPMC manufacturer-What is the differences between dry-mixed waterproof mortar and polymer cement waterproof mortar? The difference between ordinary waterproof mortar and polymer waterproof mortar lies in whether polymer latex is used for functional waterproofing. In other words, ordinary waterproof mortar achieves compact waterproof effect by optimizing the gradation or adding water-repellent agents such as inorganic […]

HPMC manufacturer-Construction technology of waterproofing cement mortar: 1. Before construction, the ground and vertical surface of the waterproof base layer must be flat, rough, clean and damp. Generally, the waterproof mortar layer must be completed in two passes. First, the waterproofing agent should be mixed with water at about 1:8 and cement mixing plain mortar […]

VAE powder-Redispersible Polymer Powder has a Good Improvement Effect on Tile Adhesives Redispersible polymer powders are spray-dried emulsions that, when mixed with water or water in a mortar, form the same stable dispersion as the original emulsion.The characteristic of redispersible polymer powder is that this powder can only be dispersed once, and it will not […]

HPMC manufacturer-Difference of Tile Adhesive and Cement Mortar on the Application of Ceramic Tile Tile Adhesive: Also named as Tile Binder, Tile Glue. Its raw materials are mainly cement powder, quartz sand, redispersible powder, hydroxypropyl methyl cellulose, starch ether, etc. As the same as cement powder, It needs to be mixed with water and mixed […]

VAE powder-Applications of VAE-RDP Applications for VAE-RDP include the formulation of building materials such as tile adhesives, grouting, finishing plasters, smoothing compounds, thin mortars and sealing pastes. The amount of VAE-RDP added to cement and mortar is approximately 2-10%, depending on the desired increase in strength, impact resistance, adhesion and water resistance of the compound. […]

VAE powder-The manufacturing process of VAE-RDP Vinyl acetate and ethylene are copolymerised in an emulsion process to produce a VAE composition with an ethylene content of 10% to 40% in the copolymer in the first instance. Ethylene is a soft, hydrophobic monomeric unit in the copolymer that acts as the internal “plasticising” part. In the […]

HPMC manufacturer-What is the composition of wall putty? Usually, Wall Putty is lime-calcium-based or cement-based. The raw materials of putty are relatively clear, and the number of various ingredients needs to be scientifically matched, and there are certain standards. Wall Putty is generally composed of base materials, fillers, water, and additives. The base material is […]

HPMC for Skim Coat Description: Hydroxy propyl Methyl Cellulose (HPMC) is non-ionic cellulose ether, which are made from natural macromolecular material cellulose through a series of chemical processes.Hydroxy propyl methyl cellulose (HPMC) are odorless, tasteless and nontoxic white powders, which can dissolve in cold water and form transparent viscous solution. They are characterized by thickening, adhesion, […]

Hydroxypropyl Methyl Cellulose(HPMC) for wall putty The wall putty is also named skim coat ,it is a decorative and functional trowelling plaster material for interior or external wall building . the function is to remove uneven defects on the surface of the base materials of wall, and eliminate the stress between different coating layers. hydroxypropyl […]