News

Dispersible polymer powder is physically mixed with other inorganic binders(such as cement, slaked lime, gypsum, clay, etc) and various aggregates, fillers and other additives such as Hydroxypropyl Methylcellulose(HPMC), polysaccharide(starch ether) and cellulose, finally to produce mortar. When the dry mortar is added to the water and stirred, the rubber powder particles are dispersed into the […]

1. Putty (Skim coating) In the whole coating process, the important role of putty is: a. Eliminate the surface defects of the coating base and improve the flatness of the base b. Plays a bonding transition role between the base layer and the coating film As the three levels of the painting process: the wall, […]

Dispersible polymer powder is physically mixed with other inorganic binders(such as cement, slaked lime, gypsum, clay, etc) and various aggregates, fillers and other additives such as Hydroxypropyl Methylcellulose(HPMC), polysaccharide(starch ether) and cellulose, finally to produce mortar. When the dry mortar is added to the water and stirred, the rubber powder particles are dispersed into the […]

Welcome to SLEOCHEM. In order to improve the brittleness and high elastic modulus of the traditional cement mortar, the cement mortar is given good flexibility and tensile bond strength to resist and delay the cracking of the cement mortar. Since the polymer and the mortar form an interpenetrating network structure,

SLEOCHEM dispersible polymer powder (RDP) forms a polymer network in the mortar product, connecting the tiles and the mortar together through intermolecular forces, and even if the tiles are denser, they can be firmly attached to the mortar.

Different dry powder mortar products have different performance requirements, and the dispersible polymer powder is required to provide suitable performance.

As the three levels of the painting process: the wall, the putty layer and the coating film of the paint, due to the different deformation coefficients when the ambient temperature changes, the deformation size is also very different.

Dispersible polymer powder is physically mixed with other inorganic binders(such as cement, slaked lime, gypsum, clay, etc) and various aggregates, fillers and other additives such as Hydroxypropyl Methylcellulose(HPMC), polysaccharide(starch ether) and cellulose, finally to produce mortar.