News

HPMC manufacturer-Main applications of Hydroxypropyl Methylcellulose (HPMC) 1. Tile Adhesive Since the tile adhesives must have very high bonding strength between the base layer and ceramic tiles, so adhesives are affected by two aspects of absorbed water, the surface of base layer (the wall/floor) and ceramic tiles. For ceramic tiles, there are large differences in […]

cellulose hpmc-Application Fields Of Hydroxypropyl Methylcellulose In Various Building Materials Application Fields Of Hydroxypropyl Methylcellulose In Various Building Materials Hydroxypropyl methylcellulose In dry mortar, the addition of cellulose ether is very low, but it can significantly improve the performance of wet mortar, which is a major additive that affects the performance of mortar construction. The […]

cellulose hpmc-Physicochemical Properties Of Hydroxypropyl Methylcellulose 1. Appearance: white or off-white powder. 2, particle size; 100 mesh pass rate is greater than 98.5%; 80 mesh pass rate is greater than 100%. 3, carbonization temperature: 280-300 ° C 4. Apparent density: 0.25-0.70/cm3 (usually around 0.5g/cm3), 5. Specific gravity 1.26-1.31. 6, color temperature: 190-200 ° C 7. […]

HPMC manufacturer-The main effect of HPMC on mortar construction Overview of Cellulose Ether-HPMC For modern building mortar, it is required to have suitable construction consistency and water retention, delay the loss of water in the mortar, prolong the operation time and open time (opening time), enhance wet viscosity and cohesion after setting and hardening, and […]

As a Construction Grade Hpmc Manufacturer, share it with you.

The benefits of adding hydroxypropyl methylcellulose ether to mortar

Cement dispersion resistance is improved by hydroxypropyl methylcellulose

Hydroxypropyl methylcellulose HPMC endows wet mortar with excellent viscosity, which can significantly increase the adhesion between wet mortar and the base layer, and improve the anti-sagging performance of mortar. in mortar. The thickening effect of cellulose ether can also increase the homogeneity and anti-dispersion ability of fresh cement-based materials

Control joints are essentially deliberate cracks cut into concrete floors that allow for movement caused by temperature and moisture changes. Put another way, when the concrete does inevitably shrink and crack, it does so on a line (at the bottom of the control joint) instead of randomly across the slab. If left unfilled, control joints can become areas for dirt, debris, and moisture to collect and cause problems.