Sand cement composes of Ordinary Portland Cement (OPC) and sand. OPC is used for rendering and masonry while sand is normally river sand, which is hard to control grain size, cleanliness, and quality.
Read MoreWhat are the differences between tile adhesive and tile adhesive on the back?
Read MoreIt has good water retention. Tiles do not need soaking treatment before pasting, can be used in construction for a longer time and smeared in large area; it has good adhesion effects, strong vertical flow resistance, and the construction can be from top to bottom.
Read Moretile adhesives using high-quality inorganic cementitious materials, fine aggregates, Portland cement, a small amount of hydrated lime and according to product quality level requirements added functional additive composition. The bonding performance is significantly higher than the traditional cement.
Read MoreThe special latex powder for tile adhesive is a new type of tile adhesive made by using cement as a gelling agent, adding high molecular polymers and inorganic powders as water-retaining agents and adhesives. It can also be applied to thin tiles. Layer bonding.
Read MoreSurface treatment:
1. The base surface should be clean, solid and stable;
2. After the new concrete surface is completed, it should be cured for at least 28 days before laying bricks;
Read MoreTile adhesive is an adhesive specially used to bond tiles. According to its composition, different products are divided into: cement-based tile adhesive, paste emulsion adhesive and reactive resin adhesive. This section mainly introduces cement-based tile adhesive.
Read More
